Brushed Nickel Vented Faucet Tap


Bulk Quantity Discounts


Replacement water filter vent tap can substitute many brands of vented taps. Ideal for water filters and drinking fountains.

Quality drinking water tap ideal to up grade your old filter tap or use on a new installation.

Vented taps are used to take the pressure of the water filter or appliance by shutting the water off before the appliance. 

Easy to install as it only needs a 22mm hole drilled in the sink and has a 60mm long thread for thick bench tops.

Height from sink to top is 285mm and 163mm across the bend.

Comes with seals, locking nut & washers and 1/4″ plastic tubing.

These taps have three 1/4″ tubes coming out from the bottom. water supply line, system inlet water, system outlet water to tap.

The following tube connections are available in the options.

(Option A) No Tube Fittings

(Option B) 3 x 1/4″ Tube Joiners. For connecting straight onto 1/4″ tubing.

(Option C) 2 x 3/8″ & 1 x 5/16″ Tube Joiners. For Connecting onto Amway Espring under sink systems.

(Option D) 3 x 3/8″ Tube Connections. For connecting straight onto 3/8″ tubing and used on older Amway under sink systems E84, E85 etc..

Other fittings available by request for larger tubing or copper pipe installations.

All tubes are about 1.8 mtrs long

Red tube is the unfiltered main water supply line.

White tube is the inlet line to the filter system or equipment.

Blue tube is the water outlet line to the tap.


You may also like…