Shopping Basket
Your basket is empty.
0Items in cart:
$0.00Total:
Currency
Language


Add this page to your favourites
Welcome Guest [Login | Register]    View Cart
Location: /Taps, PLVs, Fittings, Tubing & Accessories/Plastic Fittings, J/G Quick connect, Hose fittings & Threaded fittings/Instructions for Quick Connect fittings

Instructions for John Guest quick connection fittings

Instructions for John Guest quick connection fittings

Product Information

 

How to make a connection

To make a connection, the tube is simply pushed in by hand; the unique patented John Guest collet locking system then holds the tube firmly in place without deforming it or restricting flow.
 
Cut tube square

Cut the tube square. It is essential that the outside diameter be free of score marks and that burrs and sharp edges be removed before inserting into fitting.
 

Fitting grips before it seals. Ensure tube is pushed in to the tube stop.
 
Push up to tube stop

Push the tube into the fitting, to the tube stop. The collet (gripper) has stainless steel teeth which hold the tube firmly in position while the O-ring provides a permanent leak proof seal.
 
Pull to check secure

Pull on the tube to check it is secure. It is good practice to test the system prior to leaving site and/or before use.
 
How to disconnect

Push in collet and remove tube

To disconnect, ensure the system is depressurized before removing fitting. Push in collet squarely against face of fitting. With the collet held in this position, the tube can be removed. The fitting can then be re-used.
 
 
 

Price: $0.00


Product Code: JG instructions
 
Quantity: Add to Basket