Twin QMP Under Sink Water Filter System with UV Steriliser

$425.00$725.30

Clear

Description

APUV1-QMP-TUS 1025PS1+GTS1-10

4 LPM UV steriliser for bacteria free water.

U.S.A. made quality filter housings complete with tap and fittings for easy installation.  

Convenient great tasting water on tap in your own kitchen and you will never have to boil your drinking water again with this system. Reduces Dirt, Mud, Slime, Algae, Fibres, Toxins, Solvents, Pesticides, Herbicides, Chloroform, Chemicals. Giardia, Cryptosporidium and many more contaminants.

First stage is a premium 1 micron poly spun sediment filter 1025PS1

Second stage is a Aqua-Pro UV1 14 watt 4 LPM Ultra Violet UV steriliser.

Third stage is a GTS1-10 Silver impregnated Bacteriostatic Carbon Block filter. Silver impregnation inhibits the re-growth of bacteria in the filter.

No micro organisms are known to be immune to Ultra Violet light , it’s effective against bacteria, mould, fungal spores, viruses & yeasts.

UV sterilization is an economical yet effective solution to water sterilization without the use of chemicals like chlorine. There is a very real risk of contamination in drinking water from bores, tanks & rivers throughout Australia with even some town supplies, carry bacteria & Cysts, giardia & Cryptosporidium. S/S vessel with a quartz sleeve to cover the 14 watt 4 pin UV lamp. 1/4″ bsp inlet & outlets. 240v 3 pin ballast with a lamp failure device. It is recommended to protect your UV ballast by using a surge protection device at the power supply.

Complete with easy to read installation instructions and all fittings needed to install. The system is comes complete with Twin QMP housings on a Steel mounting bracket with quick connect push in tube fittings. Poly spun 1 micron sediment pre-filter and a Silver impregnated GTS1-10 cartridge. Installation kit contains cold water supply connection for braided hoses. Shut off tap for servicing. 3 meters of 1/4″ high pressure tubing which will allow you to mount the system away from the sink cupboard. Thread tape and housing spanner are also supplied.

Pressure limiting valves are optional.

If you use a water pump then no pressure limiting valve is required. 

If you are on town mains water supply you will need a pressure limiting and relief valve see options.

In the tap options you can choose between the Standard filter taps that only need a 12mm hole through the sink or bench top or use a all in one 3 way tap that can replace your existing hot and cold mixer tap to fit existing 33mm Hole Cut-out Diameter. Simply click on the taps option to view all the available taps.

It’s recommended to replace filters every 6 to 12 months depending on your water quality.

The UV lamp should be replaced every 12 months to maintain the maximum killing capacity.

Dimensions of housing system including bracket are 365mm high by 255mm wide without fittings.

If you are unsure about your plumbing or you need different fittings or extra filtration just contact us.

Replacement filters are 1025PS1 and GTS1-10

Replacement UV lamp is the UV Lamp 14w 4P F

Replacement ballast is the AquaPro 14 watt ballast or the universal 10-40w ballast RW5-425-40 UV

You may also like…