Undersink Conversion Kit VH3-HC351

Description

VH3-HC351+Head filter kit by 3M™

This conversion kit includes of a 3M™ VH3 filter head and 3M™ HC351-S.

Used to replace older filters and systems that have been discontinued including:

• SLC-230-1C RV Snap-seal systems
• Aquaport twin systems

The 3M™ HC351-S has a fine sediment screen wrap around a 1 micron carbon block filter. HC351-S filters will reduce:

• Sediment, including Dirt, Rust, Sand, Silt, and Algae
• Scale
• Chlorine and Chloramines
• Chemicals including many types of pesticides, herbicides and insecticides
• Bad Taste and Odours
• Cyst parasites, including Cryptosporidium, Giardia and Cyclospora.
• Volatile Organic Compounds (VOCs)
• Petrochemicals

Contains scale inhibitor media which will help protect kettles and coffee machines from scale build up.

Simple filter replacement by turning the filter a 1/4 turn to the left and pulling down.

Built in water shut off valve in the head makes filter changes as easy as changing a light bulb.

System can be used on both 1/4″ and 3/8″ plastic high pressure tubing.

Also available with the CWFAP9300 after market 1 micron filter in the product options.

3M™ HC351-S Features

• Delicious clean water
  The HC351-S does a fantastic job of removing bad tastes and odours from water, making drinking water a more enjoyable experience.
• High chlorine reduction capacity 
  With a 13250 litre maximum chlorine reduction capacity, the HC351-S is ideal for busy households and offices.
• Extremely fine sediment filtration 
  The 3M™ HC351-S removes sediment particles down to 1 Microns, improving the taste and odour of your water.
• Sanitary Quick Change System
  One of the best reasons to install a 3M™ Undersink Conversion Kit is that the VH3 head uses 3M’s™ Sanitary Quick Change system with auto water-shutoff . All you need to do is twist the filter from right to left, to remove it. The head will automatically stop the water flow as soon as soon as the filter disengages from the head.
• Watermark Certified
  Both the 3M™ VH3 and 3M™ HC351 Watermark certified, which means they comply with Australian standards.

3M™ HC351-S Specifications

• Overall height with the cartridge in the head is 305mm x 85mm wide. (you will need an extra 50mm below the system to remove the filter cartridge)
• Capacity of 13250 litres or 12 months
• Max pressure 862 kPa
• Recommended flow rate of 4 lpm
• Replacement filter is the HC351-S cartridge.
• How to instructions supplied with the kit.