Description
Omnipure K2585 CC filters contyain 100% Polyphopsphate which reduces limescale build-up.
K2585 filters are ideal for protecting water consuming appliances from scale build-up. Perfect for protecting ice machines, coffee machines, hot water urns, water dispensers, and fridges where limescale is a problem.
USA-made filter manufactured by Omnipure, one of the world’s leading manufacturers of water filters.
Please note: Polyphosphate is effective on soft to slightly hard water., If you have hard to very water, additional treatment may be required to achieve desired results.
This filter can be used to replace the Omnipure SL10-C ALL Phosphate Scale Inhibitor In Line Filter.
Comes with 3/8″ threaded female ports. Fittings are available to add 1/4″ Tube, 3/8″ Tube, 12mm tube, 1/2″ Male, and 3/8″ male connections.
Omnipure K2585 CC Specifications
- Manufacturer: Omnipure
- Model Number: K2585 CC
- Fitting Type: CC – 3/8” Female Pipe Thread
- Dimensions: 2″ W X 10″ L
- Filter Media: Polyphosphate (Scale Inhibitor)
- Service Life: 6 Months
- Flow Rate: 1.9 LPM
- Maximum Pressure: 125 PSIG (862 kpa)
- Temperature Rating: 2-38°C
General Installation Tips
- Note flow direction of filter when installing
- For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Pull on the tubing to ensure it is secure
- Threaded fittings must be wrapped with PTFE tape before installation. Do not thread sealant or overtighten
- Flush new cartridge with 12 litres of water prior to use and check for leaks.
- If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
- Replace cartridge when rated capacity (6 months) is reached, or when flow becomes too slow.
- Install in compliance with state and local laws and regulations.
These filters have an endless shelf life if unused, so buy in bulk and save.
Reviews
There are no reviews yet.