C12E Remote Undersink Water Chiller (IC8)

$598.00$747.50

Clear
SKU: IC8 Remote Chiller (C12E) Categories: ,

Description

The IC8 / C12E Waterworks Compact Remote/under-sink chiller is designed for use with water filter purification systems to supply water to a drinking water tap or bubbler. It can be conveniently installed under a sink or bench or anywhere that suits. Suitable for domestic or small office applications.  See the Optional Accessories below for Filter and Tap Kits to suit most situations.
 
Chilling & Storage Tank: Constructed of stainless steel, it has a volume of 1.8 Litres, is fully insulated and independently tested to withstand over 800psi static pressure. a drain plug and seal is provided, which is removable for servicing. The internal waterlines are 1/4″ OD stainless steel and are heliarc welded to eliminate corrosion.
 
Refrigeration System: This fan assisted, static condenser system utilises R134a refrigerant which is non toxic, non-flammable and non ozone depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts. The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed.
Cooling Performance: 6 Litres Per Hour at 10 degrees Celsius. Cooling speed: From 27 degrees to 10 degrees in 21 minutes.
 
Plumbing Connections: Both inlet and outlet are recessed, 1/4″ stainless steel pipes, suitable for connection to industry standard 1/4″ quick connect fittings and 1/4″ or larger 3/8″ Tubing by purchasing additional adaptors.
Electrical Connections: The C12E/IC8 is furnished with 1.8 metre GPO power cable and plug. 240volts, 50Hz. single Phase. Running amps 0.74A. Power Consumption 120W
 
Weight and Dimensions: 12.5kg 210mm (W) x 410mm (D) x 290mm (H)
Warranty: The C12E  has now an extended 3 YEAR comprehensive warranty backed by Water-Works Australia.
Included is a 1/4″ tube inline 350kpa Pressure limiting valve, a Pressure Relief Valve [PRV] Kit with drain clamp that is installed on the water chiller to prevent damage to the unit from water expansion. 2 x 1/4″ tube joiners to connecting inlet and outlet tubing to the top of the chiller. 1 x 1/4″ tube tee fitting. This fitting may not be required on some installations.
Note no tubing is supplied with the chiller but is available in the filter kits or separately on our site.  
The IC8 chiller is the new part number for the C12E water chiller units.
OPTIONAL ACCESSORIES
Installation and inline filter kit – Includes 1/2″ female bsp thread to 1/4″ tube inlet water tap adaptor, 5 mtrs of 1/4″ high pressure tubing, 10JG5M inline carbon filter removes Sediment, Chlorine, Chemicals, taste and odours, filter mounting clip.
Inline Filter Kit with 301/C Tap – Includes 1/2″ female bsp thread to 1/4″ tube inlet water tap adaptor, 5 mtrs of 1/4″ high pressure tubing, 10JG5M inline carbon filter removes Sediment, Chlorine, Chemicals, taste and odours, filter mounting clip. 301/C chrome ceramic disc tap for chilled water only.
Inline Filter Kit with Dual Tap 301/D – 301/D dual tap delivers Chilled and Ambient filtered water. Includes 1/2″ female bsp thread to 1/4″ tube inlet water tap adaptor, 5 mtrs of 1/4″ high pressure tubing, 10JG5M inline carbon filter removes Sediment, Chlorine, Chemicals, taste and odours, filter mounting clip. 
Contact us for pricing if you require a larger capacity unit or different fittings and connections.

You may also like…