Hybrid G13 Replacement UV Lamp and Filter Service Kit

$217.70$432.70

Bulk Quantity Discounts
2+5%

Description

Hybrid G13 Replacement Parts. Filter Size 20″ X 4.5″

Suits the Puretec Hybrid G13 whole of house filtration systems replacement filters and UV parts. Equivalent to the HR-G13R11P.

Stage 1: 1 x 5 Micron Pleated Washable Sediment Filter (2045PWBC)

Removes sand, silt, dirt, rust, mud, and other particulates from your water. High-quality Pentek brand sediment filter.

Filters down to 5 micron, ensuring that pathogens cannot hide from exposure to UV light. Can be washed several times to remove particles, replace as required with a typical service life of 6-12 months.

Suitable replacement for the Puretec PL05MP2.

Stage 2: 1 x Silver Impregnated Granular Activated Carbon Filter (2045silverGAC)

A high-quality silver impregnated granular activated carbon filter which dramatically improves the taste and odour of your water.

It also removes a wide range of chemical contaminants, including pesticides, herbicides, petrochemicals, and volatile organic compounds. Replace as required with a service life of 6-12 months

Suitable alternate to the Puretec CB05MP2.

Stage 3: 1 x 1 Micron Polyspun Sediment Filter (2045PS1)

Reduces even more sediment down to 1 micron. Replace as required with a service life of 6-12 months.

Suitable replacement for the Puretec PX01MP2.

Stage 4: UV Steriliser Components

1 x 11066 (RL6) 46 to 50 watt UV Lamp with 4 pins at one end. Dimensions 525mm (including pins) x 18.5mm (replace at 12 months)

1 x 21017 (RQS6) Quartz sleeve (needs to be cleaned every 12 months and replace if damaged or unable to clean to transparency)

2 x GT7-2NSF-OR sleeve o-rings (replace every time you remove the quartz sleeve for cleaning or at 12 months)

Simply choose the filters or kits you required to service your system.

This filter set suits the Puretec Hybrid-G13, Hybrid P series, and R11 HR-G13R11P

Frequently Asked Questions

Which Replacement Parts Do I Need?

The replacement parts you require can vary based on the quality and quantity of the water you are using. But as a general rule:

  • Filters
    Sediment and Carbon Filters need to get replaced every 6 to 12 months, The frequency of their replacement mostly depends on sediment and chemical levels in your water. You may notice a slow down to your flow rate as the sediment filters reach full capacity.
  • UV Lamps
    UV lamps must be replaced every 12 months as the level of light they produce declines after this point, which can impact the sterilisation of your water.
  • O-rings
    It’s a good idea to change your o-rings every 12-24 months. O-rings will become dry over time and can eventually developed cracks. At this point, they may allow water into the sleeve, potentially destroying your lamp and ballast.
  • Quartz Sleeves
    Quartz sleeves only need to be replaced whenever they become so cloudy that light cannot penetrate very easily. In most cases this will occur within 2-4 years. The frequency will depend on the the amount sediment, dissolved minerals, and debris in your water tanks. Some sediment and particulates can be cleaned from quartz sleeves using alcohol wipes.

Are These Filters As Good As Puretec Products?

Yes, they are.

They are as good or even better than Puretec branded products. Pentek is one of the industry’s leading producers of water filters and has a reputation for making high-quality products. The UV components are the same as those used by leading Australian retailers like UV Guard.

Reviews

There are no reviews yet.

Be the first to review “Hybrid G13 Replacement UV Lamp and Filter Service Kit”

You may also like…