Description
Triple 10″ x 2.5″ water filter housing including three GT8-12 Filter Housings on powder coated white bracket. Features 1/2″ BSP Ports which are ideal for both high flow and dedicated tap installations.
UV-resistant water filter housings perfect for both residential and light commercial applications. 1/2″ ports are compatible with a wide range of fittings including 1/2″ brass fittings and John Guest/DMFit fittings.
Robust polypropylene makes this housing suitable for both indoor and outdoor use. A reliable, long-lasting and flexible water filter housing unit. Comes sump spanner for undoing housings.
Perfect for:
- Caravan point of entry filter systems
- Under sink residential installations
- Pre-filtration for water consuming appliances like coffee machines, ice machines, and water dispensers
Features
- UV-resistant polypropylene
- Takes standard 10″ x 2.5″ water filter cartridges
- Suitable for high flow applications
- Watermarked
Specifications
- Cartridge size: 10″ x 2.5″
- Pressure rating: 500kpa
- Temperature: 4 degrees C – 45 degrees C
- Port size: 1/2″ Plastic Ports
- Max flow rate: 40 litres per minute
- Pressure differential: 20kpa @ 19LPM
WaterMark Certification
Certified to AS 3497:2021 under WaterMark Certificate Number 23247, meeting all relevant Australian plumbing requirements for material safety, integrity, and pressure performance.
Installation Requirements
- Installation must be carried out in accordance with the Plumbing Code of Australia (PCA):
- Installation must be performed by a licensed plumber if unit is installed on mains water line
- Important: Do not use any type of thread sealant. Only thread tape should be used, with a suitable o-ring. The use of thread sealant will invalidate warranty.
- A pressure limiting valve is required if pressure ever exceeds 500kpa
Reviews
There are no reviews yet.