Whole of House Sediment Water Filter Rural or Town 10″ x 4.5″



Whole of House Water Filter System for Sediment. Suits rural or town supply. Large flow rate filter ideal for most situations where water quality needs to be improved Suitable for town, rural and commercial applications.

System includes 1 x 10″ x 4.5″ Big Blue housing with 1″ Bsp threaded inlet & outlet port 1 x Housing with a Stainless Steel Bracket and a plastic housing spanner. Micron ratings available are 1, 5 & 20 microns. For extra fine filtration use 1 micron and for large particle reduction only use 20 micron, most suspended sediment will be reduced form 20 micron down. Simply choose the micron rating you need from the Filter Options in the drop down boxes below then click Add to Basket.

There are 2 options for filters to choose from.

Option 1 x 10″ x 4.5″ Poly Spun sediment filter – 1045BBPS single uses with good sediment holding capacity.

Option 2 x 10″ x 4.5″ Pleated Washable sediment filter – 1045BBPW washable filter with large surface area. Can be used a couple of times.

If you need help or not sure which option is best for you just contact us for advise. Also if you need any extra fittings we can supply them as well.

As a guide you should usually change your filter every 6-12 months but this can vary with filter, water quality and usage.

If you are on Town mains pressure we recommend to use a pressure limiting valve.


There are no reviews yet.

Be the first to review “Whole of House Sediment Water Filter Rural or Town 10″ x 4.5″”

You may also like…