Elkay 51300C WaterSentry Plus Replacement Filter — ezH2O Bottle Fillers

$189.00

Genuine Elkay 51300C WaterSentry® Plus replacement filter for Elkay ezH2O® bottle filling stations and drinking fountains. Reduces lead, chlorine, sediment, and odours. NSF/ANSI 42 and 53 certified.

Description

Genuine Elkay 51300C WaterSentry® Plus Filter ezH2O and Halsey Taylor 55898C replacement filter.

Original replacement filter for Elkay Water Dispenser models with WaterSentry® Plus filtration systems – ezH2O ® Bottle Fillers.

Recommended to replace every 12 months or 3,000 Gallons. The Elkay 51300C WaterSentry filter is certified to NSF 42, NSF 53, and NSF 372 (Lead Free)

A note on sizing: Elkay filters manufactured from March 2022 haver a 245mm body length (previously 330mm). The filter capacity and micron rating are unchanged — the shorter body is a design update only. It will still fit all compatible units.

Elkay 51300C Reduction Claims

This filter will reduce a variety of contaminants including:

  • Lead (>99%)
  • Sediment and particulates including rust, dirt, slime, sand, and silt
  • Chlorine
  • Bad taste/odours
  • Discolouration
  • Cysts (Cryptosporidium and Giardia)

Compatibility

  • All Elkay ezH2O® bottle filling stations with WaterSentry® Plus filtration
  • Elkay EWF3000 and EWF3000K systems
  • Halsey Taylor drinking fountains using the 55898C cartridge
  • Earlier WaterSentry Plus 3000-series cartridges (direct replacement, no adaptor required)

Elkay 51300C Specifications

  • Capacity: 11,356L  [3,000 gallons]
  • Service Flow Rate: 5.7Lpm [1.5 gpm]
  • Micron rating: Rated to 0.5 micron
  • Parasitic Cyst Rated – for protection against Giardia, Cryptosporidium and Cyclospora
  • Particulates: Particulate Class I
  • NSF /ANSI 42 Standard
  • NSF/ANSI 53 Standard
  • Reduces: sediment, CTO [Chlorine, Taste & Odour], cyst, lead, heavy metals and chemicals
  • Water type: Cold water use only
  • Max temp: 100ºF / 38°C
  • Max pressure: 105psi / 725 kPA
  • Design: Radial flow design
  • Filter dimensions: 245mm length x 80mm diameter
  • Country of origin: Made in USA

How To Replace Elkay 51300C Filter

  1. Turn off water supply and open water dispenser tap to relieve pressure in the system
  2. Turn filter from RIGHT to LEFT when removing – turn LEFT to RIGHT when installing.
  3. Ensure Red Label is not visible when installing – remove and rotate 180° before re-inserting to have Elkay label outward facing.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.  Data sheet is supplied with new filters.

Reviews

There are no reviews yet.

Be the first to review “Elkay 51300C WaterSentry Plus Replacement Filter — ezH2O Bottle Fillers”

You may also like…

  • SFB3 Water Bottle

    SFB3 Water Cooler Filter Bottle

    Water Works SFB3 water cooler filter & dispenser water filter top filling bottle. Replacement filter is the LB-JS05 cartridge This great looking filter bottle not only looks good it will save… View Article
    $89.50 Add to cart

    SFB3 Water Cooler Filter Bottle

    Water Works SFB3 water cooler filter & dispenser water filter top filling bottle. Replacement filter is the LB-JS05 cartridge This great looking filter bottle not only looks good it will save… View Article