Single Under Sink Water Filter Systems

$234.00$575.80

Clear

Description

QMP1/4SUS American Made quality housing system complete with tap and fittings for easy installation.

The Single under sink system is ideal for water supplies that do not have much sediment.

The system uses a standard size filter cartridge that will always be available in the future and you have a range of filter and tap options to choose from.

All the systems below will offer you convenient great tasting water on tap in your own kitchen and you will never have to boil your drinking water again with these systems. Reduces Dirt, Mud, Slime, Algae, Fibres, Toxins, Solvents, Pesticides, Herbicides, Chloroform, Chemicals, Giardia, Cryptosporidium and may more contaminants.

Complete with easy to read installation instructions and all fittings needed to install.

QMP housing on a Steel mounting bracket with quick connect push in tube fittings. Installation kit contains cold water supply connection for joining into your 1/2 inch S/S braided cold water line. A shut off tap for servicing. Inline pressure limiting and non return valve, 3 metres of 1/4″ high pressure tubing which will allow you to mount the system away from the sink cupboard. System can be standing up or on laid down if high is a problem. Thread tape and housing spanner are also supplied. If you require different fittings just contact us.

In the tap options you can choose between the Standard filter taps that only need a 12mm hole through the sink or bench top or use a all in one 3 way tap that can replace your existing hot and cold mixer tap to fit existing 33mm Hole Cut-out Diameter. Simply click on the taps option to view all the available taps.

As a guide it’s recommended to replace filters every 2000 litres or 6 to 12 months depending on your water quality. Dimensions of housings including bracket are 350mm high by 125mm wide without the fittings.

Please choose your second stage filter from these filter options.

Option 1: WC04 For TOWN WATER and reducing heavy metals. WC04 Multipure 0.4 micron carbon block filter for reducing chlorine. (Most popular option on town water)

Option 2: GTS1-10 For TANK and TOWN supplies. Ideal for holiday houses or properties where the water filter may not be used all the time. GTS1-10 Silver Impregnated 1 micron carbon filter will inhibit bacteria growth in the filter when not in use. A great all round filter with an excellent flow, ideal for low water pressure.

Option 3: BC04 For TOWN WATER high in chlorine and heavy metals.  BC04 Multipure 0.4 micron carbon block filter for reducing high chlorine. These filters have a small centre core channel allowing the filter to have more carbon in the filter.

Option 4: Doulton UltraCarb TANK for maximum protection on town or tank water from bacteria. Doulton Ultra Carb ceramic filter 0.9 micron. These filters will reduce the flow and need to be taken out and cleaned with a scouring pad each time the flow rate drops.

Option 5:  AMB/10 For TOWN. For Fluoride, Chloramines and Heavy Metal reduction. Reduces up to 92% of Fluoride and 99% of Chloramines.

 

You may also like…